Metal Painting

Give a missed call to book

Book Now

    Metal Painting

    A Professional Home Painters and Wall Painting Services in Bangalore ensures a paint wherein the pigment is essentially iron oxide, and which is utilized for painting metal surfaces. Metallic paint, also known as metal flake/polychromatic, can disclose the contours of bodywork more than non-metallic, or "strong" paint. Metallic paints might be conventionally mentioned as metal-flake paint. However, a particular variety utilizes large flakes of metal that are separately visible. Flakes with various shading impacts may also be utilized within the same paint. It is always suggested for the requirement of metal paint primer, particularly if the metal will come into any contact with moisture. Untreated metal requires a primer to seal it from presentation before any effective paint might be applied. A few metals contain anti-corrosion materials, normally, an extra metal.


    Pre Painting Process

    Before painting House Painting Contractors Bangalore will prepare new metal surfaces, we will use mineral spirits to remove grease and will apply rust-inhibitive primer before we begin to paint. For painted surfaces that are in sound condition, we will eliminate dust neatly, de-gloss, dry cloth, the surface with light sanding, and wipe with mineral spirits recommended for the great attachment. To eliminate the persistent dirt, we will wash surfaces with a detergent solution or with a product recommended for cleaning painted surfaces. We will use electric sander to remove the shiny coating of the surface. In case the old paint is in poor condition we will remove by hand wire brushing. Scraping or sanding We will clean the area thoroughly again to prevent dust and small particles which will cause small ugly bubbles on the paint./p>

    Surface Preparation

    Home Painters in Bangalore will check for the rust to make sure that the paint will stick properly to the surface. It will lightly regain the rusted metal to its original state. Revise defects on the tiles before beginning to do the paintwork. Utilize fast-drying epoxy on tile splits and caulk on chipped bits of the tiles. Make certain to let the revised zone evaporate totally. Re-apply grout to broken spots. Let these applications dry for two days. Secure painter's tape as edging over territories not proposed for painting.

    Beginning to paint

    Best House Painters in Bangalore will apply the acrylic paint primer utilizing the paintbrush. Spread all zones equitably with thin single strokes. Make certain to cover even the recessed portions involved by grout. Let the paint primer dry overnight. Repeat this cycle once again before you apply your Gloss paint. Priming is extremely important in preparing metal for paint

    Let’s Paint

    Professional Home Painters and Wall Painting Services in Bangalore will Apply the high gloss paint in a similar path as we applied the primer. will utilize the artist's brush to apply differentiating paint into the grout. and Use the brush to make fine lines or shapes, after applying the high gloss paint, we will let it dry totally. Next, we will Apply the water-based urethane paint. This paint creates a hard covering on a surface level that will make it last for quite a long time. we will Make thin layers, applying a few applications to guarantee a better completion.

    Want to paint metal surface Ready for a change?
    Time to give your space a makeover!

    Our Process

    Metal Painting